ATEN 2 x 60W Power Amplifier with DSP AP206

General Information for Aten Collaboration Accessories

ATEN 2 x 60W Power Amplifier with DSP, 120 W, D, 0.1%, 20000 , 600 , 120 W

2 x 60W Power Amplifier with DSP

ATEN AP206 is a dual-channel DSP-equipped amplifier that delivers 60 W per channel in a compact enclosure. The support for balanced / unbalanced line level inputs and the capability of driving 4 ohm low impedance or 70/100V line (in Bridge mode) loudspeaker systems have made AP206 suit a wide range of public address applications. Configurable through an intuitive WebGUI, the built-in DSP allows Speaker EQ, 5-band EQ, delay, limiter, and up to 20 presets for precise tuning and extensive audio system protection purposes. Ground lift is deployed to eliminate unwanted hum noises from power circuit. Immersive sound experience is delivered with no compromise on power efficiency thanks to the amplifiers Class-D design and ENERGY STAR qualification, conserving energy while lowering operational costs. Customizable Auto Standby mode enables the AP206 to automatically switch to sleep when the signal level comes lower than -40 / -50 dBu for 10 / 15 / 25 minutes.

Speaking of the system protection circuit, the AP206, along with the speakers connected to it, are prevented from damages led by shorted outputs, over / under-voltage, high frequency overload, and overtemperature. Plus, the amplifier will be muted when the heat sink temperature exceeds the limit. The fanless design avoids fan noise and prevents dust from building up inside the chassis.

Engineered to deliver the ultimate flexibility, the AP206 features an expansion slot for plugging in AP901 2-CH Dante Expansion Card to make the sound system compatible with Dante network or AP902 2-CH Mic/Line Pre-AMP Expansion Card to receive two channels of mic / line input signals. The amplifier can also be integrated with VK Control System via RS-232 and Ethernet connection for comprehensive control even from a distance. Mounting hardware is available for rack or surface-mounting depending on the installation needs. With a rich set of features, the AP206 assures reliable amplification with professional audio quality and high power efficiency for any enterprise-grade applications that require high quality sound reinforcement and distribution. 2 x 60W Power Amplifier with DSP

Further details for this product, 2 x 60W Power Amplifier with DSP, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.

2 x 60W Power Amplifier with DSP

ATEN 2 x 60W Power Amplifier with DSP. Peak power per channel: 120 W, Amplifier class: D, Total Harmonic Distortion (THD): 0.1%. Speakers connectivity type: Euroblock, RS-232 connector type: 3-pin. Power source type: AC, AC input voltage: 100 - 240 V, AC input frequency: 50/60 Hz. Width: 323 mm, Depth: 200 mm, Height: 44 mm. Certification: FCC, CE, UKCA

Warranty information: 3 years

ATEN 2 x 60W Power Amplifier with DSP AP206 Specifications

Product Type Amplifiers Product Type Collaboration Accessories Brand Aten Collection Model Aten 2 x 60W Power Amplifier with DSP Manufacturer Product Type Aten Collaboration Accessories Product colour Black Product Family 2 x 60W Power Amplifier with DSP RMS rated power 120 W Peak power per channel 120 W Frequency Range 50 - 20000 Hz Input impedance 20000 Total Harmonic Distortion (THD) 0.1% Output impedance 600 Speakers connectivity type Euroblock RS-232 ports 1 Number of Euroblock input connectors 2 Number of Euroblock output connectors 2 RS-232 connector type 3-pin Maximum current 2 A Power source type AC AC Input Voltage 100 - 240 V AC input frequency 50/60 Hz Depth 200 mm Height 44 mm Width 323 mm Weight 2.15 kg Amplifier class D Material Metal Country of origin Taiwan Harmonized System (HS) code 85184000 Power protection features Overload, Under voltage Storage temperature (T-T) -20 - 60 C Operating temperature (T-T) 0 - 50 C Operating relative humidity (H-H) 0 - 80% Certification FCC, CE, UKCA Master (outer) case gross weight 3.5 kg Master (outer) case height 140 mm Master (outer) case length 462 mm Master (outer) case width 322 mm Package width 322 mm Package depth 462 mm Package height 140 mm Package weight 3.5 kg MPN AP206

ATEN 2 x 60W Power Amplifier with DSP AP206 Reviews

There are no reviews for this product.