Tripp Lite NPOEI-90W-1G Industrial Gigabit Ethernet PoE injector, 90W PoE++, 802.3bt, Midspan, -40 to +75, IP30 housing, Dual 24-57VDC , DIN rail, 1 Port BL-EXT-SNOW-MNT3Y

General Information for Eaton Poe Adapters

Tripp Lite NPOEI-90W-1G Industrial Gigabit Ethernet PoE injector, 90W PoE++, 802.3bt, Midspan, -40 to +75, IP30 housing, Dual 24-57VDC , DIN rail, 1 Port, Gigabit Ethernet, 1000 Mbit/s, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, Black, 24 - 57 V, 50

NPOEI-90W-1G Industrial Gigabit Ethernet PoE injector, 90W PoE++, 802.3bt, Midspan, -40℃ to +75℃, IP30 housing, Dual 24-57VDC , DIN rail, 1 Port

Now You Can Add a PoE Device to Your LAN Without a PoE Switch
Add a surveillance camera, wireless access point, VoIP phone, outdoor kiosk, smart lights or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesnt support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE++ injector to send 90W of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling. It is recommended for outdoor applications, such as LED lights, security cameras and heater elements.

Saves You Time and Money on Unnecessary Equipment Updates
This compact PoE plus injector delivers 10/100/1000 Mbps (1 Gbps) of data and up to 90W of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also dont need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.

Expand Your PoE Network Up to 328 ft.
The NPOEI-90W-1G delivers both power and data to any IEEE 802.3af (PoE), 802.3at (PoE+) or 802.3bt (4PPoE) device up to 328 feet (100 meters) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, high voltage and overloads.

Simple Plug-and-Play Installation Has Your Device Connected in Minutes
No configuration or software is required to add the NPOEI-90W-1G to your LAN (local area network). Just connect your switch or Ethernet network to the shielded RJ45 LAN port and your PoE device to the shielded RJ45 PoE port using existing Cat5e/6/6a cable. The included terminal block offers dual primary and redundant power inputs. DIP switches and LEDs help you find the right settings for your application. The NPOEI-90W-1G automatically detects which connected devices are compatible.

Designed for Installation on a DIN Rail
A DIN rail kit is included for mounting the IP30-rated metal housing on a well-grounded corrosion-free rail. The fanless design is ideal for silent operation. NPOEI-90W-1G Industrial Gigabit Ethernet PoE injector, 90W PoE++, 802.3bt, Midspan, -40℃ to +75℃, IP30 housing, Dual 24-57VDC , DIN rail, 1 Port

Further details for this product, NPOEI-90W-1G Industrial Gigabit Ethernet PoE injector, 90W PoE++, 802.3bt, Midspan, -40℃ to +75℃, IP30 housing, Dual 24-57VDC , DIN rail, 1 Port, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.

Industrial Gigabit Ethernet PoE injector, 90W PoE++, 802.3bt, Midspan, -40℃ to +75℃, IP30 housing, Dual 24-57VDC , DIN rail, 1 Port, TAA

Tripp Lite NPOEI-90W-1G Industrial Gigabit Ethernet PoE injector, 90W PoE++, 802.3bt, Midspan, -40℃ to +75℃, IP30 housing, Dual 24-57VDC , DIN rail, 1 Port. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates: 1000 Mbit/s, Networking standards: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt. Product colour: Black. Input voltage: 24 - 57 V, Input frequency: 50/60 Hz, Total Power over Ethernet (PoE) budget: 90 W. Compliance certificates: CE, REACH, RoHS. Width: 25 mm, Depth: 100 mm, Height: 116 mm

Warranty information: 3-year limited

Tripp Lite NPOEI-90W-1G Industrial Gigabit Ethernet PoE injector, 90W PoE++, 802.3bt, Midspan, -40℃ to +75℃, IP30 housing, Dual 24-57VDC , DIN rail, 1 Port BL-EXT-SNOW-MNT3Y Specifications

Product Type Poe Adapters Brand Eaton Collection Model Eaton BL-EXT-SNOW-MNT3Y Collection Model Eaton NPOEI-90W-1G Industrial Gigabit Ethernet PoE injector, 90W PoE++, 802.3bt, Midspan, -40℃ to + Manufacturer Product Type Eaton Poe Adapters Rack mounting Yes Product colour Black LED indicators Yes Ethernet LAN data rates 1000 Mbit/s Ethernet interface type Gigabit Ethernet Networking standards IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Connectivity technology Wireless Input Voltage 24 - 57 V Total Power over Ethernet (PoE) budget 90 W Width 25 mm Depth 100 mm Height 116 mm Wall Mountable Yes Input frequency 50/60 Hz Country of origin Taiwan Operating temperature (T-T) -49 - 167 F Operating temperature (T-T) -40 - 75 C Storage temperature (T-T) -40 - 85 C Operating relative humidity (H-H) 5 - 95% Storage relative humidity (H-H) 5 - 95% Master (outer) case length 334 mm Master (outer) case gross weight 4.5 kg Products per master (outer) case 10 pc(s) Master (outer) case height 260.1 mm Master (outer) case GTIN (EAN/UPC) 10037332265927 Master (outer) case width 384 mm Sustainability compliance Yes Compliance certificates CE, REACH, RoHS Package width 232.9 mm Package depth 182.9 mm Package height 62 mm Package weight 370 g Colour of product Black Connectivity Wireless MPN BL-EXT-SNOW-MNT3Y

Tripp Lite NPOEI-90W-1G Industrial Gigabit Ethernet PoE injector, 90W PoE++, 802.3bt, Midspan, -40℃ to +75℃, IP30 housing, Dual 24-57VDC , DIN rail, 1 Port BL-EXT-SNOW-MNT3Y Reviews

There are no reviews for this product.