HPE Networking Comware Switch 24G 4SFP+ EI 5140 JL828A

General Information for HP Network Switches

HPE Networking Comware Switch 24G 4SFP+ EI 5140, Managed, L3, Gigabit Ethernet (10/100/1000), Power over Ethernet (PoE), Rack mounting, 1U

Networking Comware Switch 24G 4SFP+ EI 5140

The HPE FlexNetwork 5140 EI Switch Series delivers scalability, high availability, and low TCO at the access layer of medium and large enterprise campus networks. The series offers enterprise-class QoS and security, Hewlett Packard Enterprise Intelligent Resilient Fabric (IRF) stacking, static layer 3 routing and RIP, convenient fixed 10GbE uplink ports, PoE+, ACLs, and IPv6, and delivers energy savings with Energy Efficient Ethernet.

The HPE FlexNetwork 5140 EI Switch Series also includes Smart Management Center (SmartMC), an embedded network management tool that can be leveraged at no additional cost by small and medium networks for centralized management and operations. The series can also be managed with HPE Intelligent Management Center (IMC) for a single view of your entire network.

Features

Scalability and High Availability
- The HPE FlexNetwork 5140 EI Switch Series delivers scalability and enhances reliability of the network with HPE Intelligent Resilient Fabric (IRF) technology. IRF stacking enables virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router.
- IRF stacking enhances performance and reliability with uninterrupted L2 switching and L3 forwarding and reduces operational complexity with simpler, flatter, and more agile networks.
- Four fixed uplinks (SFP, SFP+, and 10GBASE-T) deliver performance for bandwidth intensive applications.
- Link redundancy with support for protocols such as Spanning Tree/MSTP, RSTP, and Smart link provides high availability.

Comprehensive Security Control
- The HPE FlexNetwork 5140 EI Switch Series supports flexible authentication methods including 802.1X and MAC Authentication for greater security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control.
- ACLs provide IP Layer 2 to Layer 4 traffic filtering while supporting global ACL, VLAN ACL, port ACL, and IPv6 ACL.
- Dynamic ARP protection with functions such as ARP Detection and ARP packet validation that block broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data.
- Centralized security policy management and network protection with HPE Intelligent Management Center (IMC) End User Admission Domination (EAD) which integrates security policies, network access control, and access right control policies to form a cooperative security system.
- Enhance security with encryption of access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, and RADIUS/HWTACAS.

Simplified Management
- The HPE FlexNetwork 5140 EI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) to provide end-to-end network transparency with a consistent network experience through comprehensive configuration, compliance, and policy management.
- Supports SmartMC, an embedded network management tool with a web-based GUI to simplify operations and facilitate centralized management. It offers features such as configuration backup, software version management and seamless switch replacement.
- RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events.

Enhanced Quality of Service
- The HPE FlexNetwork 5140 EI Switch Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information, it applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or entire switch.
- Provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate.
- Reduce unwanted network traffic with broadcast control and limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic. Networking Comware Switch 24G 4SFP+ EI 5140

Further details for this product, Networking Comware Switch 24G 4SFP+ EI 5140, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.

Networking Comware Switch 24G 4SFP+ EI 5140

HPE Networking Comware Switch 24G 4SFP+ EI 5140. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24, Console port: RJ-45. Full duplex. MAC address table: 16384 entries, Switching capacity: 128 Gbit/s. Networking standards: IEEE 802.1AX, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1ak, IEEE 802.1p,.... Power over Ethernet (PoE). Rack mounting, Form factor: 1U

Warranty information: Limited lifetime warranty. See the warranty duration guide.

Initial Release Date: 07/06/2021

HPE Networking Comware Switch 24G 4SFP+ EI 5140 JL828A Specifications

Product Type Network Switches Collection Model HP FlexNetwork 5140 24G 4SFP+ EI Collection Model HP Networking Comware Switch 24G 4SFP+ EI 5140 Manufacturer Product Type HP Network Switches Rack mounting Yes Stackable Yes Form Factor 1U Product Family POE Switch Product Family FlexNetwork 5140 24G 4SFP+ EI Product Family Networking Comware Switch 24G 4SFP+ EI 5140 Internal Memory 512 MB Flash Memory 256 MB 10G support Yes Port mirroring Yes Full duplex Yes Flow control support Yes Auto MDI/MDI-X Yes Broadcast storm control Yes Spanning tree protocol Yes Link aggregation Yes Auto-sensing Yes VLAN support Yes Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Installed SFP modules quantity 0 Installed SFP+ modules quantity 0 SFP+ module slots quantity 4 Console Port RJ-45 MAC address table 16384 entries Switching capacity 128 Gbit/s Throughput 96 Mpps Throughput 95 Mpps Jumbo frames support Yes Latency (1 Gbps) 5 s Latency (10 Gbps) 3 s Power source AC Power supply included Yes Power consumption (max) 24 W AC Input Voltage 100 - 240 V AC input frequency 50 - 60 Hz DHCP features DHCP server IGMP snooping Yes Authentication MAC-based authentication Authentication type HWTACACS, RADIUS Width 440 mm Width 43.6 mm Height 43.6 mm Weight 2.5 kg Depth 160 mm Routing protocols OSPF, OSPFv2, OSPFv3, RIP, RIP-2 IPv4 FIB entries 512 IPv6 FIB entries 256 Physical stacking (units) 9 Access Control List (ACL) Yes Year 2021 Switch type Managed Switch layer L3 Quality of Service (QoS) support Yes Web-based management Yes Memory Type SDRAM Operating relative humidity (H-H) 10 - 90% Operating temperature (T-T) -5 - 45 C Storage temperature (T-T) -40 - 70 C Storage relative humidity (H-H) 5 - 95% Multicast support Yes Power over Ethernet (PoE) Yes Power over Ethernet (PoE) No MPN JL828A

HPE Networking Comware Switch 24G 4SFP+ EI 5140 JL828A Reviews

There are no reviews for this product.