General Information for Netgear Network Switches
NETGEAR MS510TXPP, Managed, L2/L3/L4, 10G Ethernet (100/1000/10000), Full duplex, Power over Ethernet (PoE), Rack mounting
MS510TXPP
Introducing a new Gigabit, Multi-Gigabit and 10-Gigabit Smart Managed Pro Switch Family for future-proof deploymentsBusinesses need to be ready for future expansion: with incoming new multispeed devices, their wired network needs to expand its reach and scope to support speeds greater than 1 Gigabit. The IEEE 802.3bz standard paved the way for new 2.5 Gigabit and 5 Gigabit speeds in addition to legacy 1 Gigabit and 10 Gigabit per second. New servers, workstations, storage devices, and motherboards are coming with 802.3bz (NBASE-T) Multi-Gigabit Ethernet for 2.5X to 5X faster speeds up to 100 meters (323 feet) on legacy CAT5e / CAT6 cables.
That is why NETGEAR launched its new Multi-Gigabit Smart Managed Pro Switches with 10G Copper/Fiber Uplinks. Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to
any device that require less than 10-Gigabit, the MS510TX and MS510TXPP give the exact speed required, with no downgrade. Also, the new NETGEAR Multi-Gigabit switch ports can connect regular CAT5e Ethernet cables, without the need to upgrade to CAT6 wiring, therefore reducing wiring costs and hassle.
Access, Aggregation or Collapsed Core: You can now have your PCs, printers and routers/firewalls connected at 1G and aggregate Multi-Gigabit Ethernet new devices on the same switch, all line-rate. 10G copper and fiber ports are ready for local servers and storage, or high-speed aggregation to your network core. MS510TXPP
Further details for this product, MS510TXPP, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.
8-port PoE+ Multi-Gigabit Smart Managed Pro Switch with 10G Copper / Fiber Uplinks
NETGEAR MS510TXPP. Switch type: Managed, Switch layer: L2/L3/L4. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000), Basic switching RJ-45 Ethernet ports quantity: 8, USB 2.0 ports quantity: 1, Console port: RJ-45. Full duplex. MAC address table: 16000 entries, Switching capacity: 78 Gbit/s. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE.... Power connector: DC-in jack. Power over Ethernet (PoE). Rack m
Warranty information: 2 Years
Initial Release Date: 10/08/2017
Read more »
NETGEAR MS510TXPP Managed L2/L3/L4 10G Ethernet (100/1000/10000) Power over Ethernet (PoE) Grey MS510TXPP-100EUS Specifications
Product Type
Network Switches
Brand
Netgear
Collection Model Netgear MS510TXPP
Manufacturer Product Type
Netgear Network Switches
Rack mounting Yes
Product colour
Grey
Product colour
Gray
Number of fans 1 fan(s)
LED indicators Yes
Product Family
MS510TXPP
Product Family
POE Switch
Processor frequency 800 MHz
10G support No
Static route Yes
Full duplex Yes
Flow control support Yes
Auto-negotiation Yes
Broadcast storm control Yes
Spanning tree protocol Yes
Link aggregation Yes
VLAN support Yes
Number of VLANs 256
Basic switching RJ-45 Ethernet ports quantity 8
Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports type 10G Ethernet (100/1000/10000)
USB 2.0 ports quantity 1
Gigabit Ethernet (copper) ports quantity 4
2.5G Ethernet (copper) ports quantity 2
10G Ethernet (copper) ports quantity 1
SFP+ module slots quantity 1
Console Port RJ-45
Power Connector DC-in jack
MAC address table 16000 entries
Switching capacity 78 Gbit/s
Jumbo frames support Yes
Latency (10 Gbps) 2.36 s
Number of static routes 32
Jumbo frames 10000
Packet buffer memory 3 MB
Packet buffer memory 1.5 MB
MAC address table 16000
Packet buffer memory 1.5
Latency (10 Gbps) 2.36
Half duplex Yes
Power source AC
Power supply included No
Power consumption (typical) 19.39 W
Power consumption (max) 234.31 W
AC Input Voltage 100 - 240 V
AC input frequency 50 - 60 Hz
Total Power over Ethernet (PoE) budget 180 W
Power consumption (max) 234.31
DHCP features DHCP server,DHCP client
DHCP features DHCP server, DHCP client
Access Control List (ACL) rules 164
IGMP snooping Yes
Depth 169 mm
Width 440 mm
Weight 2.61 kg
Width 328 mm
Depth 204 mm
Height 43 mm
Weight 1.42 kg
Built-in processor Yes
Access Control List (ACL) Yes
Mean time between failures (MTBF) 376434 h
Mean time between failures (MTBF) 376434
Year 2017
Switch type Managed
Switch layer L2/L3/L4
Quality of Service (QoS) support Yes
Web-based management Yes
ARP inspection Yes
Noise level 28.8 dB
Harmonized System (HS) code 85176990
Noise level 28.8
Storage relative humidity (H-H) 0 - 95%
Storage temperature (T-T) -20 - 70 C
Operating temperature (T-T) 0 - 50 C
Heat Dissipation 799.5 BTU/h
Operating relative humidity (H-H) 0 - 90%
Operating altitude 0 - 3000 m
Operating altitude 0 - 3000
Storage temperature (T-T) -20 - 70
Storage relative humidity (H-H) 0 - 95
Operating relative humidity (H-H) 0 - 90
Heat Dissipation 799.5
Multicast support Yes
Multicast MAC address table 512 entries
Power over Ethernet (PoE) Yes
Power over Ethernet plus (PoE+) ports quantity 8
Ventilation fan(s) 1
Colour of product Grey
MAC address table (multicast) 512
MAC address table (multicast) 512 entries
MPN MS510TXPP-100EUS
NETGEAR MS510TXPP Managed L2/L3/L4 10G Ethernet (100/1000/10000) Power over Ethernet (PoE) Grey MS510TXPP-100EUS Reviews
There are no reviews for this product.