General Information for VISION Speakers
Vision CS-1900P. Speaker type: 2-way, Rated power: 70 W, Impedance: 8 . Width: 232 mm, Depth: 95 mm. Quantity per pack: 2 pc(s)
CS-1900P
The CS-1900P are based on Visions passive ceiling loudspeakers but have a powerful 70 watt amplifier built in. Easy to use and virtually invisible, these professional-grade loudspeakers are ideal for meeting spaces that can be divided, or at home.
Changing Room Layout?
For function centres which have meeting rooms that can be divided into smaller meeting rooms, a relay can switch between standalone mode, or daisy-chain mode.
Rename Bluetooth, Set Pin
Connect via USB and run software (see downloads tab) to rename and set the pin. The speakers stores the details for up to eight paired devices. Even if you change the PIN these eight devices will still connect without needing the new pin. When you pair a 9th device the 1st device will need to enter the password again to connect.
Auto-Switching
Choose to change to the Bluetooth input automatically when a device is paired, or manually switch.
Remote Control
An included IR remote control gives the
user full control, including bass and treble adjustment.
IR Front and Rear
Switch between the front IR receiver, or the rear IR receiver if using a wired control system, or off.
Master/Slave
The amplifier is housed in the master loudspeaker which has the connection panel, and a speaker output connects to the included passive slave loudspeaker.
Daisy-Chain
If you require two pairs for the room an audio output allows you to pass the audio signal on to a second pair of CS-1900P. In fact you can daisy-chain as many pairs as you need using this line-level audio output.
RS-232
For integration into a controlled audio-visual environment they can be controlled with RS-232 (serial) codes. Visions Techconnect Control can be used to control them.
Memory
2-Way with Kevlar Driver
Two-way woofer and tweeter design with quality materials and a passive cross-over for superior audio.
Auto-Standby
If the amplifier senses no input for ten minutes it will automatically go into standby mode.
- Bluetooth device NOT PAIRED when it goes into standby: they will wake up when you pair a device or play audio though the line-level input.
- Bluetooth device PAIRED when it goes into standby: if the BT input was selected only the Bluetooth source will wake them up. If the line-level input was selected only a line-level input will wake them up.
- Automatic standby can be disabled with the remote control.
Magnetic Grille
Simple to fit
A cutout template is included so the installer can easily trace the cut line in the ceiling tile. Cut a 198 mm (7.8) hole and fit the speaker; its quick and easy.
The bezel-less grille clips into place once the speakers are secured. CS-1900P
Further details for this product, CS-1900P, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.
Active Bluetooth Ceiling Speakers, 70 W, 2-Way, 80 Hz-20 kHz, Phoenix connector, 232x95 mm
Vision CS-1900P. Speaker type: 2-way, Rated power: 70 W, Impedance: 8 Ω. Width: 232 mm, Depth: 95 mm. Quantity per pack: 2 pc(s)
Warranty information: Lifetime return-to-base
Read more »
Vision CS-1900P car speaker Round 2-way 2 pc(s) CS-1900P Specifications
Product Type Car Speakers
Product Type
Speakers
Brand
VISION
Collection Model VISION CS-1900P
Product Family CS-1900P
Frequency Range 80 - 20000 Hz
Sensitivity 89 dB
Speaker Type 2-way
Tweeter Yes
Impedance 8
Depth 95 mm
Width 232 mm
Subwoofer included No
Rated power 70 W
Shape Round
Certification RoHS, CE/EMC, IEC, RCM-SDOC, RCM-POC, BT, CE-RED, FCC-BT3, FCC-BT4, REACH
Quantity per pack 2 pc(s)
Package dimensions (WxDxH) 253 x 253 x 273 mm
Remote Control Included Yes
Colour of product Blue
Connectivity Wired
Connectivity Cable
Connectivity Bluetooth
MPN CS-1900P
Vision CS-1900P car speaker Round 2-way 2 pc(s) CS-1900P Reviews
There are no reviews for this product.